半日潮海区任意时刻潮流推算方法的改进

根据航运、海洋渔业及养殖业的需要，给出了半日海潮区潮流计算的几种方法，并对传统的方法进行改进，给出新的潮流推算公式，提高了计算精度并简化了查表计算过程。     

滩涂围垦农田土壤饱和导水率的影响因素及转换函数研究

确定苏北沿海滩涂围垦农田耕层土壤饱和导水率的影响因素,构建适合该区的土壤转换函数,是研究该区田间土壤水盐运动和盐渍化防控的重要前提。本文在该区典型地块实测土壤饱和导水率和相关土壤基本理化性质,探讨了该区土壤饱和导水率的剖面分布特点,对影响饱和导水率的土壤基本性质进行了主成分分析,并建立了用于该区饱和导水率间接估算的土壤转换函数。结果表明:滩涂围垦农田土壤饱和导水率随剖面深度增加呈表土层高、亚表层低、底土层又升高的趋势,20~40 cm土层饱和导水率最小,介于2.75~6.73 cm·d-1,属低透水强度;土壤容重随剖面深度增加表现出与饱和导水率相反的变化特点。除了容重、孔隙度、质地等物理因素外,土壤肥力、盐分等化学性质也是影响饱和导水率的重要因素;影响滩涂围垦农田土壤饱和导水率的因素可由持水特性、盐碱状况、养分特征和土壤质地4个主成分反映,其累计贡献率达78.17%。在Vereecken转换函数中引入土壤盐分后可提高预测精度,修正函数Vereecken_1是最适合滩涂围垦农区土壤、具有最佳预测精度的转换函数。本文构建的土壤转换函数,可通过较易获得的砂粒、黏粒、容重、盐分和有机质对耕层土壤饱和导水率进行较高精度的预测,其结果可为滩涂盐渍化农区田间尺度土壤饱和导水率间接估算以及水盐运动数值模拟提供支持。     

云南地区扁穗雀麦繁殖对策研究

对云南野生种牧草扁穗雀麦的繁殖对策进行了初步研究,结果表明:有性繁殖和营养繁殖效果都很好,种子产量可以达到270.00 g/m2,且种子发芽率在无任何处理的情况下也能达到80%以上,总繁殖效力平均为34.24%。扁穗雀麦有性繁殖苗期生长缓慢,生长速率为0.361 cm/d,但分蘖以后生长速率加大,抽穗开花期达最大;扁穗雀麦营养繁殖成活率较高,为89.7%,生长速度比有性繁殖快,并且随植株长大,生长速率呈下降趋势;种子产量随地上生物量的增加而增加。     

杂交稻低播量精准条播育秧机插提高群体均匀度和产量的效应分析

[目的]明确杂交稻低播种量下精准条播(precision drill sowing,PS)育秧提高机插群体均匀度和产量的效应,创建杂交稻毯苗稀播少本机插理论与技术.[方法]选用籼粳杂交稻甬优1540为供试品种,在余杭区崇化村和富阳区中国水稻研究所试验基地开展试验.以传统撒播(broadcast sowing,BS)育秧...     

关于TQI、TQP、T.M平坦模、特殊环和模

本文借助左模范畴Ｒｍｏｄ的一个遗传扭论（Ｔ,Ｆ）和相应的Ｇａｂｒｉｅｌ拓扑Ｇ,讨论关于扭类的ＴＱＩ模、Ｔ．Ｍ平坦模和ＴＱＦ模。最后还特征化了扭半单模、扭半单环和扭正则环,推广了半单模、半单环和正则环。     

低频声波频率下瘤背石磺CaM-like、CaMKII基因的表达及功能

长期栖息于潮间带的动物能够感知当地的潮汐规律,形成潮汐记忆的能力。本研究以栖息于潮间带的瘤背石磺(Onchidium reevesii)为对象,研究其通过感知潮汐来临时产生的低频声音来调节其行为与潮汐节律相协调的分子机制。通过RACE-PCR技术克隆到CaM-like基因的cDNA序列,并进行生物信息学分析和qRT-PCR实验。结果显示,瘤背石磺CaM-like基因的cDNA全长2321 bp,包括5′非编码区(UTR)366 bp,3′非编码区(UTR)1337 bp,618 bp的开放阅读框编码206个氨基酸;预测该基因编码的多肽链的原子数量是3165,分子量约为23029.64 kD,理论等电点4.64,分子式是C_(1018)H_(1544)N_(274)O_(320)S_9。N端信号肽由29个氨基酸组成。氨基酸序列比对构建系统进化树,结果显示瘤背石磺CaM-like基因与静水椎实螺(Lymnaea stagnalis)、光滑双脐螺(Biomphalaria glabrata)的CaM-like基因的亲缘关系最接近,这与传统形态学分类相吻合。在实验室内模拟潮汐中低频声音刺激瘤背石磺,应用qRT-PCR检测CaM-like基因在不同组织的分布情况,结果显示CaM-like mRNA在瘤背石磺不同组织均有表达,但神经节部位的表达量显著高于背部皮肤、腹足、肠、肝胰腺、口器和蛋白腺等组织(P0.05),推测其可能参与神经系统的可塑性调节。荧光定量结果显示CaM-like、CaMKII基因分别在25 Hz和50 Hz低频声波下刺激12.4 h表达量较高,初步推测其能感知25～50 Hz声波频率。这可能与栖息于潮间带中的瘤背石磺长期感知12.4 h半日潮潮汐周期节律,形成潮汐记忆有关。本研究将为进一步深入了解瘤背石磺感知潮汐节律的分子机制奠定基础,也为探究海洋动物由海洋向陆地进化过程中对环境的适应机制提供依据。     

Microtopographic structures facilitate plant recruitment across a saltmarsh tidal gradient

相似文献   

Modelling of common European cockle <Emphasis Type="Italic">Cerastoderma edule</Emphasis> fishing grounds aimed at sustainable management of traditional harvesting

In the Bay of Saint-Brieuc, a 3,110-ha tidal bay in NW France, English Channel, the cockle Cerastoderma edule has been collected by traditional fishing methods for many decades without any evaluation or management of this resource taking place. Since 2001, the National Natural Reserve of the bay of Saint-Brieuc has carried out an evaluation of the stock and a mapping of the cockle fishing grounds each year. Analysis of the spatial structure of the population is approached by cartography through interpolation of the data using the kriging method. The recruitment zones are geographically quite well defined and located in areas limited to the mean-tide zone. The distribution of the population was affected by passive displacement of juvenile cockles. Evaluation using the matrix of individual numbers for each age group found the inter-annual mortality rates to be about 60%. Somatic production was estimated and expressed in ash-free dry weight. The average annual production ranged from 7.4 to 14.5 g/m2. In the autumn of 2006, the minimum legal fishing size changed from 30 to 27 mm (corresponding to individuals aged about 2.5 years). The model developed shows that this change has led to a doubling of the fishable stock.     

EVALUATION OF TWO OBJECTIVE METHODS TO OPTIMIZE KVP AND PERSONNEL EXPOSURE USING A DIGITAL INDIRECT FLAT PANEL DETECTOR AND SIMULATED VETERINARY PATIENTS

It is important to optimize digital radiographic technique settings for small animal imaging in order to maximize image quality while minimizing radiation exposure to personnel. The purpose of this study was to evaluate two objective methods for determining optimal kVp values for an indirect flat panel digital detector. One method considered both image quality and personnel exposure as endpoints and one considered only image quality. Phantoms simulated veterinary patients of varying thicknesses with lesions of varying sizes. Phantoms were exposed to a range of kVp values (60, 81, 100, and 121), using different mAs settings for each phantom. Additionally, all phantoms were exposed to a standard test exposure of 100 kVp/2.5 mAs. Scattered radiation was recorded and used as a measure of personnel exposure. When personnel exposure was considered, a figure of merit was calculated as an endpoint of optimization. The optimal kVp value for each phantom was determined based on the highest signal difference‐to‐noise ratio with or without inclusion of the figure of merit. When personnel exposure was not considered, increasing kVp resulted in higher signal difference‐to‐noise ratios and personnel exposure increased when both patient thickness and kVp increased. Findings indicated that a single standard technique of 100 kVp/2.5 mAs was only optimal for most medium‐sized patients. Images of thinner patients should be made with a lower kVp. Very large patients require a higher kVp than 100 regardless of the optimization method used. Personnel exposure from optimized techniques was low and not expected to exceed annual occupational dose limits.     

基于正交试验的连续平压热压工艺研究

根据连续平压机同一框架内压力相等的实际生产情况,利用单层热压机模拟纤维板连续平压机的各框架的工作状态,通过正交试验法,研究了4种厚度(3、5、12mm和16mm)纤维板的最佳热压工艺,探究了最佳工艺条件下4种厚度板坯在成型过程中的性能变化。结果表明,3mm厚的纤维板最佳工艺参数为:热压温度210℃,热压压力0.8×P_2,钢带速度1000mm/s,;5mm厚的纤维板最佳工艺参数为:热压温度210℃,压力0.9×P_2,钢带速度800mm/s;12mm厚的的纤维板最佳工艺参数为:热压温度220℃,压力1.3×P_1,钢带速度350mm/s;16mm厚的的纤维板最佳工艺参数为:热压温度220℃,压力1.3×P_1,钢带速度250mm/s